Philco POB90 Manual do Utilizador descarregar pdf (Página 14)

Removing the shelf supports

1.

Pull the front of the shelf support away

from the side wall.

2

1

2.

Pull the rear end of the shelf support

away from the side wall and remove it.

Installing the shelf supports

Install the shelf supports in the opposite se-

quence.

The rounded ends of the shelf supports

must point to the front.

Oven ceiling

You can remove the grill to clean the oven

ceiling more easily.

Warning! Deactivate the appliance

before you remove the grill. Make sure

that the appliance is cold. There is a

risk of burns.

1. Remove the screw which holds the grill.

For the first time, use a screwdriver.

2.

Carefully pull the grill down.

3. Clean the oven ceiling with a soft cloth

with warm water and a cleaning agent,

and let it dry.

4.

Install the grill in the opposite se-

quence.

Warning! Make sure that the grill is

correctly installed and that it does not

fall down.

Oven lamp

Warning! Be careful when you change

the oven lamp. There is a risk of

electrical shock.

Before you change the oven lamp:

• Deactivate the oven.

• Remove the fuses in the fuse box or de-

activate the circuit breaker.

Put a cloth on the bottom of the oven

to prevent damage to the oven light

and glass cover.

1. Turn the glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3.

Replace the oven light bulb with an ap-

plicable 300 °C heat-resistant oven

light bulb.

Use the same oven lamp type.

4.

Install the glass cover.

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Comentários a estes Manuais

Sem comentários